Ethernet Over E1/E3 Bridge

CV200 Managed Media ConverterCV200 TTX Ethernet Over E1 Bridge

The CV-200 is a manageable 10/100 Base-T Ethernet bridge that connects to a G704 network termination in E1 – 2,048 Mbps or T1 – 1,544 Mbps.

 

 

CVE3T3 Ethernet over E3 BridgeCVE3T3 Coax Ethernet Converter

The CV-E3T3 is an Ethernet bridge with an E3 – 34.368 Mb and T3 – 44.736 Mbps interface. It transports Ethernet traffic over a point to point, or a carrier network in an E3 or T3 trunk.

 

 

DM704CE Ethernet Over E1/Serial BridgeDM704CE E1 to V Series Converter + Ethernet

The DM704CE is a device that uses the G.703 interface at 2,048kbit/s, with a frame structure in conformity with G.704, a V.35/V.11 interface or an Ethernet interface with the bridge remote functionality. Desktop converter (195x200x44mm), with 93-250VAC or 36-72VDC automatic power supply. These are the main features included:

 

 

DM704SE Ethernet Over E1/Serial BridgeDM704SE E1 to V Series Converter + Ethernet

The DM704SE is a device that uses the G.703 interface at 2,048kbit/s, with a frame structure in conformity with G.704, a V.35/V.11 interface or an Ethernet interface with the bridge remote functionality. Comprised of a standard-size card, which can be used for both chassis and subracks in for modem/converter cards. These are the main features included:

 

 

MX200-TTX E1/T1 RS232 & Ethernet Bridge Access MiniMuxMX200-TTX E1/T RS232 & Ethernet Drop & Insert Access Mux

The MX200-TTX is an E1 – 2,048 MBPS, and T1 – 1,544 MBPS access mux that provides three terminal ports : a E1 / T1 Drop & Insert port, an Ethernet interface, and an RS232 port to connect to an asynchronous terminal equipment. The MX200-TTX is a must product to share an E1/T1 network access for LAN / data and E1/T1 / voice traffic.

 

 

XM-F4E1-4TTX Ethernet over E1 Bridging MultiplexerXM-F4E1/S4E1-4TTX Ethernet Over E1 Inverse Multiplexer

The XM-F4E1-4TTX / XM-S4E1-4TTX is an Ethernet Inverse Mux that provides point to point connectivity from 10/100 BaseT LAN to LAN over 4 parallel E1 links. The XM-F4E1-4TTX is a solution for Telco’s to deploy large Ethernet bandwidth over E1 infrastructures.

 

 

XM-M16E1 Ethernet over TDM MultiplexerXM M16E1T1 4TTX Multiplexer

This equipment is used to distribute IP/Ethernet or Internet access over multiple E1/T1 links. The n E1/T1 can be transported by Microwave or SDH or PDH networks. The XM-M16E1 is an very efficient tool to deploy small DSLAM in a low density area over long distance traditional Microwave. The XM-M16E1 is an automatic system, bounding up to 16E1 to transport over Ethernet between two nodes or multiple node. This Plug and Play solution provide a better bandwidth, better latency and lower cost solution than routing and bridging system.

 

 

XM-SW2STM1-2CB EoPDHoSDH Bridging MuxXM-SW2STM1-2CB Ethernet Over PDH Over SDH

The XM-SW2STM1-2CB is an Ethernet inverse multiplexer that provides connectivity from GE copper or fiber LAN to LAN over up to 63 E1 in parallel. The XM-SW2STM1-2CB is mainly used as a switch with 2 uplink Combo GE with SFP and up to 63E1 EoPDH mapped in a STM1.

 

 

XM-SW16E1 Bridging Inverse MuxXM-SW16E1-2TG Ethernet Over E1 Bridging Multiplexer

The XM-SW16E1-2TGTX is an Ethernet inverse multiplexer that provides connectivity from 10/100/1000BaseT LAN to LAN over multiple E1 links up to 16. The XM-SW16E1-2TGTX can be used with hops of multiple E1’s in a ring to distribute Ethernet with a fast protection based on E1 events. This hops of parallel E1’s are generally microwave radio or G.SHDSL in parallel.