The CW4002 is an X21 or RS530 fibre optic modem that provides reliable, synchronous transmission over fibre, at data rates between 70 bps to 10Mbps
The FO-4BRI is a fibre optic modems that carries 4 independent BRI with 2B and 1D channel. This modem is available for multi-mode or single-mode fibre, covering the distance of 4, 8, 30 and 60 km.
The FO 4E1T1 is a fibre optic modem that multiplexes 4x E1 or T1 and 2x Ethernet 10/100BaseT interfaces. The FO4E1T1 is a fibre optic multiplexer of 4x E1, 2 Mbps G703 or 4x T1, 1.544 Mbps interfaces, and an Ethernet / IP traffic. This fibre optic modem transports the 4x E1/T1 interfaces with a full clock transparency and independence with a minimum excursion of 200 ppm. It is aimed at connected PBX, Base Stations, ISDN T2, and any E1/T1 based equipment.
FO-E1E2 is a fibre optic modem for Telco or enterprise, which carries transparently over a fibre optic link, an E1 G703 2Mbps or G704, voice or data, PSTN, ISDN to interconnect PBX, PDH / SDH nodes. This device can also carry old G703 E2 8Mbps links front of Satellites or Microwave radio; or face to the co-directional V.11 FO-SECD for military applications.
The FOE3T3 is a fibre optic modem aimed at transporting a G703 E3 or T3 interface. Thanks to a choice of fibre optic interfaces or SFP module, the FOE3T3 extends E3 & T3 links over distances of 4 km up to 200 km with SFP or single fibre WDM. This product is very convenient to transport E3/T3-DS3 in shorter distance instead of dual coax cable.
The FO-SERIAL is a fibre optic modem used to deploy high rate Leased Lines in Local Loop as well by enterprise or administration to extend the line customer premise or to interconnect router or unstructured applications like video codec, data from encrypted serial system in military domain.
The FO-TTX is a fibre optic modem,100 Base FX to transport a LAN, 10/100 BaseT interface. It connects to Ethernet 10/100 BaseT equipment and can be used as follows